Panier

Votre panier est vide.

Votre panier est vide.
En stock

tomzz Audio 2815-005 Anneaux de Haut-parleurs Adaptateurs Supports compatibles avec Ford Focus C-Max Kuga Porte Avant pour Haut-parleurs DIN 165mm

Livraison gratuite à partir de 25.99€
14.39€ -44%

7.99€

  • les adaptateurs / bagues de haut-parleurs tomzz permettent de remplacer les haut-parleurs d'usine d'origine par des haut-parleurs de meilleure qualité de marques courantes
  • convient pour Ford Focus 2 (DA3) à partir de 2004-2010 (porte avant), Ford C-Max 1 (C214) à partir de 2003-2010 (porte avant), Ford C-Max 2 à partir de 2010 (porte avant), Ford Kuga 1 à partir de 2008-2012 (porte avant), Ford Kuga 2 à partir de 2013-2016 (porte avant)
  • Tenue sûre, précision d'ajustement, design attrayant, Matériau : plastique
  • adapté à la taille des haut-parleurs DIN : 165mm
  • Pour plus d'informations, veuillez consulter la description du produit !


Ces adaptateurs de haut-parleurs / bagues de haut-parleurs sont utilisables pour les véhicules suivants :
Ford Focus 2 (DA3) à partir de 2004-2010 (Tür avant)
Ford C-Max 1 (C214) à partir de 2003-2010&nbsp ;(Tür avant)
Ford C-Max 2 à partir de 2010&nbsp ;(Tür avant)
Ford Kuga 1 à partir de 2008-2012 (T&uuml ;
Ford Kuga 2 à partir de 2013-2016 (portes avant)
pour des haut-parleurs de 165 mm
Les adaptateurs/bagues de haut-parleurs Tomzz vous permettent de remplacer les haut-parleurs d'origine par des haut-parleurs de meilleure qualité de marques concurrentes. Les haut-parleurs d'usine ont généralement une forme qui ne correspond pas à la norme DIN. Il est donc pratiquement impossible de monter un haut-parleur DIN. En utilisant nos bagues d'adaptation, de nouveaux haut-parleurs peuvent être installés dans votre véhicule sans grand effort.


Blandin Maxence
11 mars 2025
Bien compatible avec Ford Kuga de 2010 tdci 140 (pour portières avant)
Peppe
23 février 2025
Prodotto non adatto alla focus 2009
Endre
11 octobre 2024
I was conflicted whether to give 3 or 4 stars, it's a 3 star product kind of but for the price and considering you don't have many options it's a 4 if you're careful with it.The small pins the screws go in are a bit thin and I worried a lot what screws to use. I think I settled with 3/20 screw after all. I am not super confident the screw holes will hold to all the vibration in the car. In retrospect maybe I should have used the MDF adapter but this was the first one I found. I actually kind of ruined one of the holes with a 3.5 screw so I bought an extra set if I need it, didn't need it after all but it's ok to have a backup I guess, can always sell it if I don't need it down the line.All in all the adapter is suitable to mount the speakers and didn't really have problems I just don't trust the screw holes in the plastic. It's pretty cheap so you can buy it just don't expect something great and be super careful with screwing the speakers in.I mounted the adapter to the door panel using bolts with washer and nut, the springy type to make sure it holds and I don't have to tighten it too much. No issues there.

Vous aimerez aussi